Contact Form
Product-banner2

JJY-2D Borehole Geometry Probe

PRODUCT PARAMETERS

  • Send instructions from the ground and execute them from the motor.
  • Easy to use, high measurement accuracy (well diameter signal has 12-bit resolution), high reliability
Description
FAQ
Get A Quote

Description

JJY-2D Borehole Geometry Probe is a mechanical four-arm contact caliper. The four-way dynamic seal piston of the instrument is connected to a zero temperature drift linear sensor, which converts the borehole diameter change into a digital quantity and then transmits it to the ground through encoding. The measurement data in two directions are used to conduct formation information research and formation stress analysis.

● Bare hole fill with water or mud

● Bare Dry hole

● Locating cracks, caves and casing defects

● Diameter measurement and rock formation stress analysis in two directions

● Rock formation integrity evaluation

● Drilling diameter measurement and correction calculation in conjunction with other well logging

● Send instructions from the ground and execute them from the motor.

● Easy to use, high measurement accuracy (well diameter signal has 12-bit resolution), high reliability

Well diameter measurement methodFour-arm well diameter
Well diameter measurement rangeΦ60~600 mm
Measurement error1.5% F.S
Well diameter leg opening methodGround command control, Motor executes retraction and retraction
Signal outputBipolar encoding

FAQ

REQUEST A QUOTE

REQUEST A QUOTE