Welcome to Geotech!

GEO-GPR Single-Frequency Geophysical Radar Series | 100MHz–1.6GHz Shielded Antenna
PRODUCT PARAMETERS
- 6 Shielded Frequencies, Full Depth Coverage
- UWB All-Digital Receiver, High Thin-Layer Resolution
- Wireless Integrated Design, Cable-Free Operation - 350 Lines/s High-Speed Scanning, Real-Time Imaging
- Directional Antenna Option, Fits 50 mm Min. Boreholes
- Built-In Trajectory Positioning, Accurate Spatial Results
Description
Abstract
GEO-GPR Series offer six monomer-shielded antenna frequencies (100/200/400/600/900 MHz/1.6 GHz) with integrated host-antenna design, built-in battery and wireless connection — one platform from deep survey to shallow inspection.

Technical Highlights
- 6 frequencies:Full coverage from 100 MHz to 1.6 GHz
- Wireless host:Cable-free connection to computer
- 350 lines/s:High-speed scanning with real-time imaging
Features
- High resolution: Ultra-wideband (UWB) technology enhances thin-layer recognition
- Directional antenna: Customizable 200 MHz / 400 MHz with adjustable beam angle
- All-digital receiver: High sensitivity and dynamic range, real-time signal processing
- Dual-mode switching: Omnidirectional/directional; dry, wet, vertical and horizontal holes
- Small boreholes: Minimum borehole diameter of only 50 mm
- Trajectory positioning: Integrated inclination & azimuth measurement for spatial accuracy
Applications

- Tunnel engineering:Lining, laying quality inspection, outstrip early report, inverted arch quality inspection, etc
- Road engineering:Structure layer thickness inspection, cracks inspection and roadbed fail and harm inspection, etc
- Water conservancy engineering:Water source research, ice layer detection and water bottom structure detection, etc
- Bridge engineering:Concrete iron fix position, steel twist wire fix position, concrete fail and harm inspection, etc
- Civil engineering:Pipeline fix position, road cavity inspection and road structure inspection, etc
- Geology survey:Rock melt detection, frozen earth detection and stratum form detection, etc
- Military:UXO detection, underground defense works detection and life detection, etc
- Archaeology:Historic ruins detection imaging and guide digging etc
Specifications
| Parameter Item | GEO-GPR-100MHz | GEO-GPR-200MHz | GEO-GPR-400MHz | GEO-GPR-600MHz | GEO-GPR-900MHz | GEO-GPR-1.6GHz |
| Antenna Type | Integrated Shielded Antenna | |||||
| Antenna Center Frequency | 100 MHz | 200 MHz | 400 MHz | 600 MHz | 900 MHz | 1.6 GHz |
| Scan Rate | 350 traces/s | |||||
| A/D Converter Resolution | 18 / 32 bit | |||||
| Continuous Operation Time | ≥ 8 h | |||||
| SNR | ≥ 160 dB | |||||
| Maximum Penetration Depth | 30 m | 8 m | 5 m | 2 m | 1 m | 0.8 m |
| Overall Dimensions | 820 × 620 × 290 mm | 600 × 440 × 230 mm | 450 × 310 × 170 mm | 460 × 210 × 210 mm | 400 × 160 × 170 mm | 170 × 160 × 110 mm |
| Minimum Sampling Interval | ≤ 10 ps | |||||
| Data Acquisition Modes | Point-by-point, Distance-triggered, Continuous | |||||
| Display Modes | Color Imaging, Stacked Waveforms, Grayscale Images | |||||
| Operating Temperature | -30 ℃ ~ +70 ℃ | |||||
| Operating Voltage | 10–15 VDC | |||||
| Wireless Communication Range | ≥ 50 m | |||||
| Main Unit Net Weight | 18.15 kg | 10.2 kg | 5.85 kg | 3.35 kg | 2.25 kg | 1 kg |
| Total System Weight | 27.95 kg | 20.75 kg | — | — | — | — |
Case Studies
Cases 1:100MHz Shielded Ground Penetrating Radar Cases
Detection Objective: To investigate the geological media conditions within 30 meters ahead of the tunnel face.

Image Analysis
Diversion Tunnel No. 1:

Description: The image shows the advance geological prediction results for Diversion Tunnel No. 1, with the survey line running from left to right when facing the tunnel face. The GPR image reveals strong radar reflection signals in the 2–7 m range, suggesting that the rock mass in this zone is relatively fractured. In the left half of the tunnel face, at a depth of 7.5–12.5 m, strong reflection signals are also observed, indicating that the rock mass in this zone may be fractured or contain fissures.
Diversion Tunnel No. 2:

Description: The image shows the advance geological prediction results for Diversion Tunnel No. 1, with the survey line running from left to right when facing the tunnel face. The GPR image reveals strong radar reflection signals in the 2–7 m range, suggesting that the rock mass in this zone is relatively fractured. In the left half of the tunnel face, at a depth of 7.5–12.5 m, strong reflection signals are also observed, indicating that the rock mass in this zone may be fractured or contain fissures.
FAQ
① In SI, it is m·s-2, and one percent of it is the international unit abbreviation g.u.;
② Conversion between SI and CGS: 1g.u.=10-1 mGal
Gravitational field: The space around the earth with gravity is called the gravitational field.
Gravitational potential: The gravitational potential W in the gravitational field is equal to the work done by a particle of unit mass moving from infinity to that point.
① The normal gravity field of the earth: Assuming that the earth is a rotating ellipsoid (reference plane), the surface is glossy, the internal density is uniform, or it is distributed in concentric layers, the density of each layer is uniform, and the deviation of the shape of the ellipsoid from the geoid is very small, then the gravity field generated by the earth is the normal gravity field.
② The normal gravity value is only related to the latitude, the smallest at the equator and the largest at the poles, with a difference of about 50,000 g.u.; the rate of change of the normal gravity value with latitude is the largest at 45° latitude, and zero at the equator and the poles; the normal gravity value decreases with increasing altitude, and its rate of change is -3.086 g.u.. The main feature of the long-term change is the "westward drift" of the geomagnetic elements, both the dipole field and the non-dipole field drift westward, and have a global nature.
The gravitational field strength is equal to the gravitational acceleration in both numerical and dimensional terms, and the two are in the same direction. In gravity exploration, all references to gravity refer to gravitational acceleration. The gravitational field strength at a point in space is equal to the gravitational acceleration at that point.
Gravity exploration is an exploration method that is based on the density difference of rocks and ores. Since density difference will cause local changes in the normal gravity field of the earth (i.e. gravity anomaly), it is used to solve geological problems by observing and studying gravity anomalies.
-1.png)





















