Handheld metal detector coil on dry grassland, portable underground metal searching prospecting equipment product banner

GEO-G1 96-Electrode Resistivity & IP System丨Distributed & Single-Channel ERT System

PRODUCT PARAMETERS

GEO-G1 96-Electrode Resistivity & IP System: 950 m 2D profile in one deployment, 1D sounding to 4D monitoring, two-person crew, roll-along cascaded layout, 32-bit / 2 nV precision, expandable to 120+.

  • 950 m profile, single deployment
  • Two-person crew
  • Roll-along cascading, +50% efficiency
  • Resistivity + IP, 1D–4D
  • Expandable to 120+Electrode
Description
FAQ
Get A Quote

Description

The GEO-G1 96-Electrode package is the balanced workhorse configuration for medium-scale geophysical projects. It inherits all core performance of the GEO-G1 series: 32-bit high-precision acquisition, omnidirectional cascaded architecture and dual-mode wireless connectivity.

This system integrates full resistivity and induced polarization (IP) functions. It supports 1D sounding, 2D long profiling, 3D array expansion and 4D monitoring. With 96 electrode channels, it strikes an optimal balance between survey coverage, equipment cost and field portability.

It is the gold-standard choice for most engineering, environmental and resource exploration projects. A two-person team can complete full survey workflow efficiently. All hardware is fully compatible with higher channel upgrades to protect your investment.

System architecture diagram of the GEO-G1 Intelligent Multi-Electrode Resistivity and IP Meter showing the central hub, host unit, power supply, cascade controllers, cables, and stainless steel electrodes.

96-Electrode Package Exclusive Advantages

This configuration delivers 60% wider profile coverage than the 60-channel package, without excessive equipment cost. With 10 m standard spacing, it supports a maximum 2D profile length of 950 m in a single deployment.

A two-person field team can handle full deployment and data acquisition. It eliminates the need for large crews required by traditional centralized ERT systems. It delivers the best cost-to-performance ratio for routine medium-depth survey tasks.

You can expand channels to 120 or higher at any time by adding extra converters and cables. No mainframe replacement is needed.

Core System Performance

Roll-along flexible layout allows converters to move freely along the survey line. You can reel cables in or out during measurement, boosting field efficiency by over 50%. Smart staged acquisition starts measurement once partial electrodes are deployed. You can adjust profile length flexibly on site.

Dual-mode wireless connectivity combines Bluetooth and built-in 4G. It enables remote operation and real-time data monitoring for unattended long-term projects. 32-bit ADC delivers 2 nV voltage resolution and 2.5 nA current resolution. It captures subtle subsurface anomalies far beyond conventional 24-bit instruments.

140 dB power-line rejection and ±10 V automatic SP compensation ensure reliable data quality near urban areas and high-voltage lines. Built-in 12 V / 7 Ah Li-ion battery supports over 40 hours of continuous operation without 4G connection.

IP67-rated core components work stably from −25 ℃ to 50 ℃, adapting to harsh field environments. High-power transmitter delivers up to 1200 V / 8 A output, with fully adjustable pulse width and duty cycle for different geological conditions.

Standard Array Configurations

The system preloads 12 standard electrode arrays to cover diverse survey demands:

  • Wenner array (α)
  • Dipole-dipole array (β)
  • Differential array (γ)
  • Pole-pole array (A / B)
  • Pole-dipole array (AM)
  • Schlumberger array (α2)
  • Wenner-Schlumberger array
  • Gradient array
  • Custom programmable arrays

Efficient Multi-Array Measurement

The system supports automatic continuous measurement under a single array, combining both sounding and profiling modes. You can run multiple arrays with multiple electrode spacings in one deployment. This maximizes data output per field trip and reduces re-deployment work.

2D Long Profile Survey

The 96-Electrode configuration is optimized for 2D long profile surveys. With 10 m standard electrode spacing, it reaches a maximum profile length of 950 m in a single setup. It fully covers the survey depth and length demands of most engineering and environmental projects.

2D survey layout diagram of GEO-G1 60-channel cascaded ERT system
2D survey layout diagram of GEO-G1 60-channel cascaded ERT system

Scalability & Upgrade Path

The cascaded architecture supports seamless channel expansion. You can add more converters and cables to upgrade to 120 channels or full 3D areal arrays. The system also supports cross-hole surveys and waterborne measurements with optional accessories. One system grows with your business needs.

3D survey layout diagram of GEO-G1 60-channel cascaded ERT system
GEO-G1 ERT software data processing interface displaying measuring point list, current and voltage waveforms, 2D inversion sectional drawing, and scatter plot.

On-Site Acquisition Control

The included Android panel provides real-time multi-channel waveform monitoring, parameter adjustment and data quality visualization. It supports 20+ time-window chargeability analysis and full waveform recording of current and potential. Script programming and automatic iteration measurement reduce manual intervention and improve field efficiency.

Data Processing & Export

The built-in preprocessing system supports multiple export formats: TXT, Excel, DAT and URF. All data is fully compatible with mainstream geophysical inversion software including RES2DINV and RES3DINV. Batch data processing function significantly speeds up office work and report delivery.

Receiver Specifications

ParameterValue
Voltage range±12 V
Measurement accuracy±0.1% ±1 digit
ADC resolution32-bit
Voltage resolution2 nV
Input impedance≥50 MΩ
Chargeability accuracy±0.2%
SP compensation range±10 V (auto tracking)
Power-line rejection140 dB

Transmitter Specifications

ParameterValue
Current range±8 A
Measurement accuracy±0.1%
Current resolution2.5 nA
Max. output voltage1200 V
Max. output current8 A
Pulse width / duty cycleFully adjustable
Protection featuresOvercurrent, overvoltage, short circuit, overheat

System General Specifications

ParameterValue
Standard channels96 electrodes (expandable)
CommunicationBluetooth + built-in 4G
Built-in battery12 V / 7 Ah Li-ion
Battery life40+ hours (4G disabled)
Protection ratingIP67 (core components)
Operating temperature−25 ℃ to 50 ℃
Storage temperature−30 ℃ to 60 ℃
ItemSpecificationQuantity
G1 Resistivity & IP Mainframe1200V 8A integrated host, 4G + Bluetooth dual-mode1
Switch-12 Cascaded Converter12 electrodes per unit, 1000 V / 4 A, 0.5 kg each8
12-Tap Cascaded Cable10 m spacing, 12 taps per cable; 5 m optional8
DC480 Li-ion Battery10-level output, max. 480 V / 2 A, IP67 rated1
Android Operation PanelWireless touch control for on-site operation1
30 cm Non-polarizing ElectrodesCopper sulfate electrodes for stable signal acquisition96

Optional accessories: borehole junction boxes, underwater electrodes, extended-range power supply, rugged transport case.

The 96-Electrode package is optimized for four core application categories.

Application fields overview diagram of the GEO-G1 ERT system covering Engineering Geophysics, Resource Exploration, Environmental Investigation, and Special Surveys.

Engineering Geophysics

  • Long-profile dam and levee seepage detection
  • Highway and railway route engineering survey
  • Urban underground pipeline and cavity detection
  • Tunnel advance geological prediction
  • Pile foundation bedrock depth investigation

Resource Exploration

  • Medium-depth groundwater resource prospecting
  • Shallow to medium metal and non-metal mineral exploration
  • Geothermal resource preliminary survey

Environmental Investigation

  • Large-scale landfill contamination monitoring
  • Groundwater pollution plume mapping
  • Slope stability detection
  • Tailings pond safety monitoring

Special Surveys

  • Large-area archaeological prospection
  • Regional shallow geological mapping
  • Geological hazard detailed investigation
  • Medium-scale research and teaching projects

For extra-long profiles, large 3D arrays and permanent monitoring stations, we recommend the 120-channel standard configuration. For small quick surveys, choose the 60-channel portable package.

Case 1: Earth Dam Seepage Path Detection

Project: Full-length seepage survey of a 900 m earth dam. Result: The 96-Electrode system completed full profile measurement in a single deployment. High-precision data identified two low-resistivity seepage anomaly zones inside the dam body. It provided critical data for dam reinforcement and safety assessment.

Field engineering photos showing a geophysical engineer operating a VES/ERT instrument on-site and the equipment setup with yellow cables deployed on terrain.
Backup power supply and battery unit connected to electrical resistivity tomography (ERT) equipment during field geophysical surveys.

Case 2: Highway Route Engineering Survey

Project: 8 km geological survey for a highway route design project. Result: With roll-along layout, the two-person team completed 8 profiles in 3 working days. The system delivered clear stratigraphic boundary data and hidden cavity detection results. It supported efficient route optimization and foundation design.

Case 3:Medium-Depth Groundwater Exploration

Project: Groundwater resource survey in a hilly area with medium exploration depth. Result: The 96-Electrode configuration delivered sufficient depth and profile coverage. Inverted resistivity profiles accurately identified aquifer distribution and fracture zones. It provided reliable basis for well site selection.

FAQ

① In SI, it is m·s-2, and one percent of it is the international unit abbreviation g.u.;
② Conversion between SI and CGS: 1g.u.=10-1 mGal

Gravitational field: The space around the earth with gravity is called the gravitational field.
Gravitational potential: The gravitational potential W in the gravitational field is equal to the work done by a particle of unit mass moving from infinity to that point.

① The normal gravity field of the earth: Assuming that the earth is a rotating ellipsoid (reference plane), the surface is glossy, the internal density is uniform, or it is distributed in concentric layers, the density of each layer is uniform, and the deviation of the shape of the ellipsoid from the geoid is very small, then the gravity field generated by the earth is the normal gravity field.
② The normal gravity value is only related to the latitude, the smallest at the equator and the largest at the poles, with a difference of about 50,000 g.u.; the rate of change of the normal gravity value with latitude is the largest at 45° latitude, and zero at the equator and the poles; the normal gravity value decreases with increasing altitude, and its rate of change is -3.086 g.u.. The main feature of the long-term change is the "westward drift" of the geomagnetic elements, both the dipole field and the non-dipole field drift westward, and have a global nature.

The gravitational field strength is equal to the gravitational acceleration in both numerical and dimensional terms, and the two are in the same direction. In gravity exploration, all references to gravity refer to gravitational acceleration. The gravitational field strength at a point in space is equal to the gravitational acceleration at that point.

Gravity exploration is an exploration method that is based on the density difference of rocks and ores. Since density difference will cause local changes in the normal gravity field of the earth (i.e. gravity anomaly), it is used to solve geological problems by observing and studying gravity anomalies.

REQUEST A QUOTE

REQUEST A QUOTE