Welcome to Geotech!

GEO-GPR-1.6GHz Single-Frequency Geophysical Radar Series | 1.6GHz
PRODUCT PARAMETERS
- 1.6 GHz Integrated Shielded Antenna, Maximum 0.8 m Penetration Depth
- UWB All-Digital Receiver, Ultra-Fine Thin-Layer Resolution
- Wireless Integrated Design, Cable-Free Operation 350 Traces/s High-Speed Scanning, Real-Time Imaging
- Directional Antenna Option, Fits 50 mm Min. Boreholes
- Built-In Trajectory Positioning, Accurate Spatial Results
Description
Abstract
The GEO-GPR-1.6GHz is the highest-frequency antenna in the GEO-GPR series and the one that answers the tightest questions: exactly where this cable runs, how thick this layer is, whether there is a void in the top few hundred millimetres before a coring bit or a pile driver reaches it.
It weighs 1 kg. There is no cart, no cable, no separate box — the antenna contains the transmitter, receiver, battery and wireless link, and the record appears on the panel as it is swept. Where lower-frequency models map the ground, this one maps the surface layer with centimetre fidelity.

Technical Highlights
- Centimetre-scale imaging. Roughly 1.6 cm quarter-wavelength resolution in concrete, close to the limit at which a GPR profile becomes a drawing of the near-surface rather than an interpretation of it.
- 1 kg, one hand. The lightest unit in the range, usable overhead, on a ladder, inside a shaft or across a finished floor without a second person or a protective surface mat.
- Positive cable and service location. Small-diameter ducts, comms cables and shallow services that disappear into the footprint of a 400 MHz antenna return discrete, separable diffractions here.
- Wireless end-to-end. Battery, radio and processing inside the housing means the only object on site is the antenna in the operator’s hand.
Features
- 1 kg hand-held monostatic shielded antenna — the lightest in the GEO-GPR range
- All electronics, battery and wireless radio sealed inside the housing
- ≥8 h continuous operation on internal power
- Point, distance-trigger, continuous and GNSS-triggered acquisition
- Real-time pseudo-colour, grayscale and stacked-waveform display
- Live gain, band-pass and Dewow control while sweeping
- Dense trace spacing at 350 traces/s for fine lateral sampling
- Interchangeable on the same receiver with 100 MHz to 900 MHz antennas
Applications

| Application | What the 1.6 GHz antenna delivers | Typical depth |
| Shallow cable and service location | Small ducts, comms and power cables at hand-dig depth | 0.02–0.5 m |
| Thin-layer thickness measurement | Surfacing, screed, membrane and coating thickness | 0.01–0.3 m |
| Concrete near-surface QA | Bar at shallow cover, air voids, honeycombing, delamination | 0.01–0.4 m |
| Pothole and Asphalt layer check | Top-down layer boundaries and moisture in the surface course | 0.02–0.4 m |
| Wall and floor scanning | Embedded conduits, voids and structural change before coring | 0.01–0.35 m |
| Heritage and forensic detail survey | Fine stratigraphy, buried fabric and small artefact response | 0.02–0.6 m |
Typical Performance Reference
Vertical resolution ≈ λ/4, λ = c / (f · √εr). Depth bands are guidance; confirm against local ground conditions.
| Medium | εr | Wave velocity | Reference depth band | Vertical resolution |
| Dry sand, gravel, asphalt | 4 | 0.150 m/ns | 0.5–1 m | ≈2.3 cm |
| Moist soil, general overburden | 6 | 0.122 m/ns | 0.4–0.9 m | ≈1.9 cm |
| Sound limestone, concrete | 9 | 0.100 m/ns | 0.3–0.8 m | ≈1.6 cm |
| Wet clay, basalt | 16 | 0.075 m/ns | 0.2–0.5 m | ≈1.2 cm |
| Saturated fine-grained soil | 25 | 0.060 m/ns | 0.1–0.3 m | ≈0.9 cm |
Specifications
| Parameter | Specification |
| Antenna type | Monostatic shielded antenna |
| Centre frequency | 1.6 GHz |
| Scan rate | 350 traces/s |
| A/D conversion | 18 / 32 bit |
| Signal-to-noise ratio | Better than 160 dB |
| Maximum detection depth | 0.8 m |
| Acquisition modes | Point-by-point, distance-triggered, continuous |
| Display modes | Pseudo-colour, stacked waveform, grayscale |
| Continuous operating time | ≥8 h |
| Wireless data range | >50 m |
| Operating voltage | 10–15 V DC |
| Operating temperature | −30 °C to +70 °C |
| Unit weight | 1 kg |
| Series compatibility | Full GEO-GPR antenna family, 100 MHz to 900 MHz |
Full technical documentation and demonstration data available on request.
Options & Accessories
- Vehicle-deck, hand-cart, tunnel-trolley and rail-carriage mounting frames
- High-accuracy GNSS positioning for coordinate-logged survey lines
- Data processing and 2D/3D inversion software package
- Interchangeable GEO-GPR antennas from 100 MHz to 1.6 GHz
- Extended-range battery pack for multi-shift deployments
FAQ
① In SI, it is m·s-2, and one percent of it is the international unit abbreviation g.u.;
② Conversion between SI and CGS: 1g.u.=10-1 mGal
Gravitational field: The space around the earth with gravity is called the gravitational field.
Gravitational potential: The gravitational potential W in the gravitational field is equal to the work done by a particle of unit mass moving from infinity to that point.
① The normal gravity field of the earth: Assuming that the earth is a rotating ellipsoid (reference plane), the surface is glossy, the internal density is uniform, or it is distributed in concentric layers, the density of each layer is uniform, and the deviation of the shape of the ellipsoid from the geoid is very small, then the gravity field generated by the earth is the normal gravity field.
② The normal gravity value is only related to the latitude, the smallest at the equator and the largest at the poles, with a difference of about 50,000 g.u.; the rate of change of the normal gravity value with latitude is the largest at 45° latitude, and zero at the equator and the poles; the normal gravity value decreases with increasing altitude, and its rate of change is -3.086 g.u.. The main feature of the long-term change is the "westward drift" of the geomagnetic elements, both the dipole field and the non-dipole field drift westward, and have a global nature.
The gravitational field strength is equal to the gravitational acceleration in both numerical and dimensional terms, and the two are in the same direction. In gravity exploration, all references to gravity refer to gravitational acceleration. The gravitational field strength at a point in space is equal to the gravitational acceleration at that point.
Gravity exploration is an exploration method that is based on the density difference of rocks and ores. Since density difference will cause local changes in the normal gravity field of the earth (i.e. gravity anomaly), it is used to solve geological problems by observing and studying gravity anomalies.
-1.png)


















